EN 6
hold it for 2 seconds, and set a new cooking time
if necessary.
SETTING THE MINUTE MINDER
The clock can also be used as a minute minder
which will sound an alarm upon expiry of a set
amount of time. The minute minder can only be
selected when the program timer is not programmed
or in use.
Select the (3) symbol by consecutively pressing
the (A) knob until the symbol starts to flash.
Rotate the (A) knob to set the time when you wish
the minute minder to sound the alarm. The
longest possible setting is 3 hours.
Confirm the setting by pressing the (A) knob
again. Clock hands will automatically turn to lock
display and the symbol (3) will be lit up.
When the time you set runs out, an intermittent
acoustic signal will be sounded. The acoustic
signal can be switched off by pressing the (A)
knob and holding it for 2 seconds; otherwise, it
will switch off automatically after 1 minute.
DISPLAYING THE SETTING
Whenever a timer function is set, you may check it
by pressing the (A) knob. The clock hands will briefly
move to the set value and then return to display the
current time.
DELETING A SETTING
Delete the setting by pressing the (A) knob and
holding it for 2 seconds. The symbol of the deleted
function will be switched off.
CLEANING AND MAINTENANCE OF THE
COOKER
Keep to the following principles while cleaning or
maintaining the cooker:
Set all knobs in off position.
The main curcuit - breaker placed before
appliance must be in OFF position.
Wait until the cooker is cool.
LACQUER-COATED AND PLASTIC
SURFACES
Clean the buttons / knobs and the door handle with
a soft cloth and liquid detergents intended for
cleaning smooth lacquer-coated surfaces. You may
also use the cleaners made especially for this type
of surfaces; in this case, follow the manufacturer’s
instructions.
WARNING
The above surfaces should never come into contact
with oven cleaning sprays, as these will permanently
damage the aluminum parts.
COOKER SURFACE
Use a damp sponge with detergent for cleaning.
Fatty stains can be removed with warm water and
special detergent for enamel.
Never clean enamelled surfaces with abrasive
means producing irremovable damage to the
appliance surface.
HOB GRID
Remove the cooking grid from the hob and wash it
separately or place it into the dishwasher. After
washing replace it to fit the appropriate groves in the
hob.
Remove burner parts (cover, distributor) from the
hob and soak them in warm water with added
detergent for 10 minutes.
After washing dry the burner parts carefully and
check whether all burner notches are clean, then
return them back to their position.
NOTICE
Since the burner distributor caps are made of
aluminum alloy, we discourage you from cleaning
them in a washing machine.
OVEN
Clean the oven walls with a damp sponge with
detergent or special cleaner for ovens. If there are
baked ends on the wall, water them, use the bursh
and then clean with damp sponge. Do not use
sharp, metal instruments. Following cleaning,
carefully dry up the oven. Clean the oven only when
cold. Never use abrasive means scratching the
enamelled surface.
Wash the oven appurtenances with a sponge and
detergent or employ the dish wash machine (shelf,
pan, etc.) or use suitable detergent to remove rough
impurities or burns as the case may be.
AQUA CLEAN
The oven may be cleaned in a traditional mode
(using ovencleaners and sprays).The following
procedure is recommended for regular cleaning of
the oven (after each use):Turn the mode selection
button to the position
. Set temperature control
button of the cold oven to 50°C. Pour 0,4 lof water
into the baking pan and insert it into the bottom level
guide. After thirty minutes the food residues upon
the enamelcoating are softened, and may be easily
wiped off with a moist cloth.