3
EN
Installation Instruction
Remove the microwave oven from packing.
Remove all packing materials and accessories
from the microwave oven cavity.
Check whether the following parts are in good
condition:
-
Door and hinges;
-
Front of the microwave oven;
-
Inside and outside of microwave oven.
Should you find any faults DO NOT USE THE
MICROWAVE OVEN, and contact your dealer.
Place the microwave oven on a flat stable surface
able to support its weight.
To allow efficient cooling of the microwave oven
its installation is recommended in a unit with an
opening in the upper part (refer to the installation
instructions leaflet enclosed).
Warning: The microwave oven plug shall be
accessible after installation.
When installing the microwave oven great care
should be taken to ensure that the mains power
cable cannot come into contact with the rear since
the high temperatures involved could cause
damage.
When the microwave oven is installed in a column
with a conventional oven, the microwave oven
must not be located underneath the conventional
oven because of the possibility of condensation
forming inside the latter.
The microwave oven has been supplied with a
mono-phase power supply cord. The appliance
must be earthed.
WARNING:
THIS
APPLIANCE
MUST
BE
EARTHED.
The manufacturers and dealers are not liable for
any breakdowns or personal accidents should
these installation instructions not be observed by
the purchaser.
Summary of Contents for BM 5120 AX
Page 87: ......
Page 88: ...Cod 1831052...