Electrical connection
Make certain the nominal a.c. power supply voltage corresponds to that
indicated on the identification data plate. The appliance must be
connected to the supply by way of an isolating switch with minimum
contact separation of 3 mm. Suitable isolating components include
automatic breakers, fuses and relays.
The oven must be connected to an efficient earth system, as prescribed
by national and/or local statutory regulations.
The cable must be connected as prescribed by statutory regulations and
respond to the specifications indicated on the Technical Data page.
The terminal box is located at the rear of the appliance. If a new cable is
fitted, route it through the clamp and make the connections as shown in
the diagram. The earth wire must be cut longer than the other wires so
that it will be the last to break off in the event of the cable being tugged.
Having made the connection, tighten the cable clamp and close the cover
of the box.
CONNECTION DIAGRAM
CABLE TYPES AND SECTIONS
