Instructions for use, installation and connection
14
Installation of electric oven
•
Panels and furniture lining of the kitchen cabinet receiving
the hob must be treated with temperature resistant
adhesives (100°C), otherwise they might be discoloured or
deformed because of inadequate temperature resistance.
•
Before installation you must remove the rear panel from the
kitchen cabinet in the area of installation.
•
Follow the exact dimensions of the installation aperture,
indicated on the illustration.
•
Bottom of the kitchen cabinet (max 530 mm) must always be
shorter than side panels in order to provide adequate
ventilation.
•
Level the kitchen cabinet using the spirit level.
•
Kitchen cabinet carrying the installed appliance must be
fixed to the adjacent cabinet to ensure adequate stability.
•
Push the appliance into the cabinet so that screw guides
located in the oven frame holes stay on the cabinet side
panels. Be careful not to tighten the screws excessively
because you may damage the cabinet sides or the enamel
of the appliance.