Gorenje Plus GIS64XC Instructions For Use Manual Download Page 20

454509

Recognising a mode 

Stand-by mode

The display for each cooking zone shows 
‘0.’. The red light to the right above the 
On/Off button   is constantly illuminated.

(Standard) lock 
mode

One or more displays show a power 
setting. The red light  to the right above 
the 

 button and the red light  to the 

right above the On/Off button   are 
constantly illuminated.

Child lock mode

Display for all cooking zones will indicate 
“0”. The indicator   next to the 

 

sensor key (23) will be lit constantly. All 
lights on the display will go off after ten 
seconds. Child safety lock will remain 
activated.

Stop / Go mode

Display for all cooking zones will indicate 

. The indicator   next to the   sensor 

key (17) will be lit constantly.
The pause function will only work if one 
or more cooking zones are activated. 

Memory mode

Display for all cooking zones will indicate 
“0”. The indicator   next to the   sensor 
key (17) will fl ash. 

Cooking timer/Minute minder

A cooking timer can be set for each cooking zone. All of the 
cooking timers can be used at the same time. The hob also has an 
minute minder. Both the cooking timer and the minute minder can 
be set to a maximum of 99 minutes.
The minute minder works the same way as the cooking timer, 
but is not linked to a cooking zone. If set, the minute minder will 
continue to run after the hob has been switched off. The minute 
minder can only be switched off when the hob is switched on.

The cooking timer

The minute minder

The cooking timer must be 
linked to a cooking zone. This 
means that the cooking zone 
switches off when the set time 
elapses.

The minute minder is not 
linked to a cooking zone. The 
minute minder continues to 
run after the hob has been 
switched off.

Switching on the minute minder

The hob is switched on.
 1. To set the cooking time or the minute countdown timer, touch 

the   sensor key. The display will read “00”. 

 2. Use the slider for the selected cooking zone to set the desired 

cooking time. The minute countdown timer stars counting 
down when the dot next to the time display disappears. If no 

20

Summary of Contents for GIS64XC





































Reviews: