Gorenje Plus GIS64XC, Instructions For Use Manual

Page: 19 / 36

454509
Switching on the child lock
The hob is in stand-by mode. The display for each cooking zone
shows ‘0.’.
1. Touch and hold the
button to switch on the child lock.
The symbol next to the sensor key (23) will be lit
constantly.
If no buttons are touched within 10 seconds, the cooking zone
will automatically switch off. The child lock remains active. You
can even switch off the hob.
Touch the button
again within 10 seconds to switch off the
child lock and unlock the control panel.
You must wait 10 seconds before switching the hob on again with
the On/Off button in order to switch off the child lock.
Tip
Switch the hob to child lock mode before cleaning it to
prevent it accidentally switching on.
Stop / Go
Use the Stop / Go function to 'pause' the whole hob for 10
minutes while cooking. The power for all of the cooking zones
is automatically switched off. This is convenient, for example, if
a pan boiled over and you want to clean the hob. You can also
leave the hob unattended for a short period of time without losing
any settings.
Switching the hob to Stop / Go mode
One or more cooking zones are active.
1. Touch the sensor key once.
You will hear a beep and the indicator (17) will light up.
For each cooking zone, the display (14) will indicate a
symbol .
• Any set cooking timers/minute minders stop.
• All of the buttons are inactive except the
button, the
button and the On/Off button .
If no buttons are touched within 10 minutes, all of the active
cooking zones are automatically switched off.
Switching off Stop / Go mode
Press the buttom again within 10 minutes and press any other
button immediately afterwards.
Recall function
If you mistakenly turn off the hob, all settings can be restored
within six seconds by turning the hob back on and pressing the
STOP/GO button immediately afterwards.
19