SKU 94114 For technical questions, call 1-800-444-3354 Page 2
Specifications
There are no Replacement Parts for this Product
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep
the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always be
followed to reduce the risk of personal property and damage to equipment. Read
all instructions before using this product!
1.
Do not operate the product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment/reflexes might be impaired.
2.
Never use this product as a towing rope.
3.
Before using this product, check with the local Department of Motor Vehicles for
required safety regulations when using this product.
4.
Do not let children play with this product. It is not a toy.
5.
Activate the Flashing Emergency Light to indicate caution when using this product.
Activate the solid red light when using this product at night.
6.
Do not operate the product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment/reflexes might be impaired.
7.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
8.
Protective gloves and nonskid footwear are recommended.
9.
Wear restrictive hair covering to contain long hair.
10.
Use eye and ear protection. Always wear ANSI approved impact safety goggles
when setting up this product.
11.
Maintain proper footing and balance at all times.
12.
To avoid risk of personal injury, equipment damage, fire and shock, make sure your
work area is free of damp, wet or rainy conditions. Keep area free from clutter.
13.
Use this product for its intended use only. Never force this product to do the work of
a larger industrial tool. This product is not for towing.
Note: This product is used for securing the Trunk of your vehicle in place while holding a
light load. Always use ropes, chains, or other appropriate devices to safely hold a
larger load in place.
Dimensions
Material
Finish
Wire
Light
Cutter
Power
Source
Net Weight
3.25”L X 3.75” Square X 1.25”T
Hi Impact ABS, Stainless Steel, Two Red LED’s, Twisted Steel Wire,
Die Cast Hook (Qty. 2).
Silver w/Black Trim. Chrome Plated Fasteners.
Spring Loaded-Extends 4’-10” w/Snap-clip Black Slider, Locks Wire Down.
2-Way Push Button. Stays lit or Flashes.
5/8” Serrated Edge Blade
AAA 1.5V Batteries (Qty. 2) (Batteries Included)
.55 Lbs.
