AirTop
5
•
Step 2: The pump must be in a reverse setting.
•
Step 3: Deflate completely until all the air is out of the product. Then turn the plunger up to
close the valve. This prevents air from being pulled back into the unit.
•
(If you do not have the use of a vacuum blower do the following):
•
Step 4: Roll out as much air as possible before storing. Once it is rolled more air will escape.
•
Step 5: Once it is folded, tie up and put it back inside the outer bag.
•
Do not store it without placing it inside the outer bag. This protects from surface abrasions.
•
Do not place anything heavy on top of the product while it is stored.
Exposed valve, with plunger pushed in
“Deflate” side (see writing on right side)
Hose attaches to “deflate” side here
Hold nozzle inside valve
