AirTop
4
•
Step 3: Insert the other end of that same hose into the AirTop’s valve and turn on the pump.
•
IMPORTANT: when operating the pump, do not obstruct or cover it. The vents on either side
must not face down. Doing so can damage the motor.
•
Step 4: Once the product is fully inflated, turn off the pump and remove the hose from the
valve.
•
Step 5: Promptly re-‐place the tabs on the valves, turning them slightly to tighten.
USING THE AIRTOP
•
Once the product is fully inflated users sit on each of the saddle arms.
•
Hold onto the handle straps found near the top of the product to avoid falling off.
•
Users attempt to tip the AirTop in different directions just like in a teeter-‐totter.
•
Whether users are sitting or standing on the edges of the AirTop, it is recommended that users
hold onto the straps when it is moving.
•
The safety guidelines in this manual must be followed.
•
Discontinue use if an unsafe situation arises, whether it be in the use (see Safety Information) or
in the condition of the product (see Before Using). Do not allow use until the issues are
corrected.
DEFLATING AND PUTTING AWAY
•
Step 1: Flip the tabs off the top of the valves. For deflation, depress and turn the plunger
clockwise before inserting pump.
Hold nozzle inside the valve
