AirTop
3
•
Remove outer bag from the AirTop. Fold and store the bag someplace that will not be in the
way.
•
The AirTop Large weighs 81 lbs. If needed get help for carrying or setting up. (AirTop Small
weighs 41 lbs).
•
Loosen the straps and unfold the AirTop.
•
Unfold and set up the product on a flat, level, non-‐abrasive surface.
•
The AirTop has 6 valves: one in each of the four spokes, one in the center of the piece and one
in the perimeter. Locate and insert the pump into each. Normal inflation time is approximately
30 seconds to 3 minutes.
•
Close each valve.
•
Do not over-‐inflate, especially in hot weather. This will cause the air to expand and potentially
damage the product, resulting in a voided warranty.
•
Do not use high-‐pressure pumps or air compressors to inflate this product. Limit = 3.5 psi
INFLATING THE AIRTOP
•
Step 1: Open the tabs off the tops of the valves. Push the plunger in and turn it either way to
keep it open.
•
NOTE: Inflating the piece without opening the valve puts unnecessary pressure on the pump.
•
Step 2: Fasten the yellow hose to the correct side of the pump. Align the black plastic end of the
hose with the button on the pump casing and turn to ensure a tight fit.
Exposed valve
“Inflate” side (see writing on right side)
Hose attaches to pump here
