GoPro HERO 7 BLACK, Setup + Troubleshooting Manual

Page: 13 / 52

13
Return to Contents
MOUNTING
+
A
CCESSORIES
H CAMERA MAINTENANCE
Tell the customer to keep these tips in mind when they use their camera:
Check the seal for dirt and debris before securing the door.
Rinse the camera with fresh water after use in salt water, dirt or mud. Let it air dry.
Do not use any oils or lubricants on the rubber seal.
Clean the seal by wiping gently with a finger. Do NOT use a towel.
Small fibers can compromise the waterproof effectiveness of the seal.
Pinch the backdoor closed before securing The Frame or SuperSuit latch.
This reduces stress on the latch and helps prevent cracks and breakage.
Always unhook the frame latch before sliding out the camera.
SEALS + HOUSINGS
CAMERA SEALS
All HERO7 camera doors lock out water using rubber seals.
HERO7 Black has a side and bottom door. HERO7 White
and HERO7 Silver only have side doors.
THE FRAME SUPERSUIT
For all HERO7 cameras
Bottom door on
HERO7 Black.
Side door on all
HERO7 cameras.
Uber Prot Dive
Housing for HERO7 Black
CAMERA HOUSINGS