Gopel Electronic basicCON 4113, User Manual

Page: 8 / 15

Hardware
2-2 USB 4113/ basicCON 4113 – User Manual
basicCON 4113
is a
GOEPEL electronic GmbH
stand-alone device based
on a USB 4113 board to be connected directly to a PC or Laptop. It has
been developed for the independent operation out of complex test
systems.
basicCON 4113 can be supplied via the USB interface or via the ext.
Power Supply connections (see Power Supply ).
At the device’s rear side, there are the following connections:
♦
USB-B female for the USB 2.0 interface
with USB standard assignment
♦
DC female for the AC adaptor plug (part of delivery)
♦
Banana females for power supply
Please use for external power supply either the banana females
OR the DC female for the AC adaptor plug.
Additionally, please refer also to the corresponding chapter
regarding Power Supply .
Figure 2-2:
basicCON 4113
Figure 2-3:
basicCON 4113 – rear side