Goot RX-892AS, Operation Manual

Page: 8 / 36

TAIYO ELECTRIC IND.CO.,LTD. 8
TAIYO ELECTRIC IND.CO.,LTD.
3
Rules for Safe Operation
1. DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do not use the soldering station in damp or wet locations or expose it to
external environmental conditions, particularly rain. Never use it in an explosive
atmosphere. The heat from the heater can ignite fumes. Be sure that the work area
is well ventilated.
2. KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDERING STATION.
Do not let bystanders touch the soldering station. All bystanders should be kept a
safe distance from the work area.
3. USE FOR THE RIGHT JOB.
Your soldering station is an electrical tool used to solder parts and melt solder. Do
not use the soldering station for any other purpose. For example: The soldering
station should never be used to warm water or other liquids.
4. WEAR PROPER APPAREL, SAFETY GLASSES, GLOVES AND MASK.
The object to be soldered and melted solder get very hot. Please be sure to wear
proper apparel, safety glass and gloves to prevent injury and property damage. Do
not wear unsuitable apparel for operation.
5. CONNECT TO THE SPECIFIED AC POWER SUPPLY.
Connect to AC 100-240V 50/60Hz power supply. Never plug the soldering station
into any other voltage.
6. DO NOT BEND THE POWER/IRON UNIT CORDS
Requires periodic inspections. Check that there is no damage. Do not carry the
unit by the power/iron unit cords. Hold by the plug when disconnecting the power
cord from a wall outlet. When unplugging, pull on the plug. Do not pull on the cord.
Keep the power/iron unit cords away from heat, oil, and sharp edges.
WARNING
The RX-892AS is an anti-static model. Be sure to
properly ground the soldering station using a grounded
receptacle to prevent electric shocks and anti-static. If
it is not properly grounded, electric shocks will occur. As
the soldering station uses conductive materials, please
be careful not to touch any electrical power source or a
serious injury will result.