TAIYO ELECTRIC IND.CO.,LTD.
10
TAIYO ELECTRIC IND.CO.,LTD.
1
2
3
Key Operation
TEMP Display
NOTE ) If nothing is pressed for 30 seconds the temperature automatically returns to
the temperature setting before it was changed. The tip temperature will remain
unchanged.
*The set temperature should be set at 50°C (90˚F) higher than the sleep
temperature (see the section 4-4), otherwise you will not be able to set the set
temperature value. (Example: If the set temperature is set at 200°C (392˚F),
the sleep temperature must be 150°C (302˚F) or lower.
4-1 Changing the Set Temperature
Displays flashes
➔
Refer to the Parameters table (on
page 31) for the explanation of the display
messages.
Press the
key.
Setting completed
Press the
Press and hold the
key until the
display shows
340
.
key.
Example: Changing the temperature from 250°C (482
°F
) to 340°C (644
°F
).
When the station is shipped the temperature is set at 250°C (482°F). The temperature
can be set from 50°C (122°F) to 450°C (842°F).
*For the steps given in the operation instructions, only °C is used.
4
Operating Instructions
Summary of Contents for RX-892AS
Page 33: ...TAIYO ELECTRIC IND CO LTD 33...
Page 34: ...TAIYO ELECTRIC IND CO LTD 34...
Page 35: ...TAIYO ELECTRIC IND CO LTD 35...
