Goot RX-892AS, Operation Manual

Page: 7 / 36

TAIYO ELECTRIC IND.CO.,LTD.
TAIYO ELECTRIC IND.CO.,LTD. 7
1. HEAT lamp
Lights up when the heater is ON.
2. SLEEP lamp
Flashes while setting the SLEEP function.
Lights up when the unit enters the SLEEP mode.
3. TEMP display
When the power is turned ON or when SLEEP mode is exited, the TEMP
display shows the tip temperature rise to the set temperature.
The TEMP display shows the set temperature.
4. Alarm Lamp (to the right of the last digit in the temperature display)
Lights up when the tip temperature is within the DIF range.
Turns off when the tip temperature is out of the DIF range.
Flashes when the tip temperature is out of the upper and lower
temperature limits.
5. KEY LOCK lamp
Flashes while setting the Key Lock function.
Lights up when the Key Lock mode is set.
6. KEY LOCK key
Used to set the Key Lock function.
Used to lock and unlock the keypad.
7. SETTING key
This key is pressed when starting and completing the temperature
setting process. It is also used during the parameter changing procedure
to move to the next parameter and to complete the parameter setting
process by pressing continuously for 3 seconds.
8. DOWN key
This key is used to reduce the temperature and change the parameter.
9. UP key
This key is used to increase the temperature and change the parameter.
■
Operation Panel
KEY
LOCK
HEAT
SLEEP
TEMP. ˚C
①
⑤
⑥
③
②
④
⑦ ⑧ ⑨
TEMPERATURE CONTROL