13
Size
72(W)
×
106(H)
×
178(D)mm
Weight
485g
INSTRUCTION FOR USE
DIMENSIONS
NAMES OF PARTS / REPLACEMENT PARTS
Rub the soldering-iron tip on the moistened sponge.
Use the hole of the sponge for better cleaning.
Alternatively, push the soldering-iron tip in and out of the
brass wool a few times. Stab, not swipe.
The angle of the front opening
can be adjusted by loosening
screws on the side.
REPLACEMENT PARTS
Heat-Resistant Sponge
/
ST-53SP
Front Opening (with adjusting screws)
/
ST-27MS
Brass Wool (2balls)
/
ST-40BW
•
To avoid rust, do not pour water on the brass wool.
•
Sponge
tray and holding flange (of the front opening) are made of
phenol. Be aware that extended tip-contact may result in their
deterioration.
•
Remove the collected solder scrap regularly.
NOTE
Front Opening
ST-27MS
Adjusting Screws
Heat-Resistant
Sponge
ST-53SP
Brass Wool
ST-40BW
