2019 | Confidential and Proprietary | Do not distribute
●
Run the lock’s cable through the hole in
the mounting plate and press the
mounting plate pins through the holes
in the deadbolt. Then, use the bolts
that are the right length for the door to
secure the mounting plate.
●
Before you fully tighten them, make
sure the keypad and plate are square to
the door. Use a bubble level if needed.
7. Install the lock
●
Plug the cable to the connector on the lock. It can only be plugged in one way. Look for a small tab to align
it correctly. Then route the cable behind the cable hooks to hold it in place.
●
Guide the spindle through the hole and hook the lock onto the bottom of the mounting plate. Press the
lock firmly onto the plate. It will snap into place.
Important: Make sure the lock’s thumb turn is pointed vertically and the bolt is fully retracted before you attach
the lock to the plate.
●
Use the two small black bolts to screw the lock into the mounting plate. You can find the holes for the bolts
in the battery compartment of the lock.
