Google AC-1304, User Manual

Page: 3 / 14

To satisfy FCC exposure requirements, a separation distance of at least 20 cm should be maintained
between the antenna of this device and persons during device operation. Operations at closer than this
distance are not recommended.
The antenna used for this transmitter must not be co-located in conjunction with any other antenna or
transmitter.
For indoor use only
Google Wifi was designed by Google Inc. of 1600 Amphitheatre Parkway, Mountain View, California 94043
and assembled in China.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Under Industry Canada regulations, the radio transmitter(s) in this device may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
CAN ICES-3 (B)/NMB-3(B)
Warning:
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
Radio Frequency (RF) Exposure Information
The radiated output power of this device is below the Industry Canada (IC) radio frequency exposure limits.
This device has been evaluated for and shown compliant with the IC Radio Frequency (RF) Exposure limits.
The device should be used in such a manner such that the potential for human contact during normal
operation is minimized.
When using the device next to your body, maintain a distance of 20 cm (8 inches) from your body to be
consistent with how the device is tested for compliance with RF exposure requirements.