23
35
GOODNATURE X-6 COMMERCIAL COLD PRESS JUICER
OWNER’S MANUAL
Section 5:
Operation
NOTICE: Never set the hydraulic pressure above 1800 PSI as it will apply unnecessary stress to the machine.
NOTICE: Hydraulic pressure adjustments in the hydraulic pump should only be performed by a qualified
technician to avoid damaging the internal components.
5.5 ADJUSTING HYDRAULIC PRESSURE
The hydraulic pressure is set to 1500 PSI during manufacturing. This is appropriate for most produce; however, for some produce, a
lower pressure is ideal.
1
2
3
4
5
6
Put the directional lever in neutral position and turn the hydraulic power unit on.
Turn the directional lever to forward position and allow the press to fully open.
Once the cylinders are fully extended, the pressure gauge should start to display an increase in hydraulic pressure.
Loosen the lock-nut on the adjusting screw located on the bottom of the manifold block. (Fig 5.3)
Using an Allen wrench, turn the screw counterclockwise to lower the pressure, or clockwise to raise the pressure.
When the desired pressure is achieved, re-tighten the locknut.
Fig 5.3: Adjusting Hydraulic Pressure
Adjusting screw
NOTICE: Relieve pressure from hydraulic system by cycling the directional control lever prior to servicing.