Goodmans GDB5, Introduction Manual

Page: 9 / 24

9
getting started
1 Put batteries in the remote
Remove the cover on the rear of the remote control
and insert two ‘AA’ size batteries. Ensure you insert
them the correct way round as shown inside the battery
compartment. Replace the cover.
2 Switch the unit on
With the unit connected to the power you should see the
green light on the front panel indicating the unit is on.
1. Switch on your TV. You should see the Setup screen.
If you do not see the Setup screen you may have to
select AV or similar on your TV remote.
2. Press OK on your remote to start a search to find all
the free digital channels available in your area. Press
the green button (OK) when the search is finished.
You see the first channel displayed on screen.
3 View digital TV channels
Once a search for channels has been completed you can
watch any of the stored digital channels as follows:
1. Press the DTV button at any time or if viewing the
menu on screen, press Exit repeatedly until you see a
channel on the screen.
2. Change to another channel by using one of the
following methods:
• press the number of the channel you want
• press the up or down arrow keys to find the channel
and press OK to select
• press GUIDE and use the up, down and OK keys,
see TV Guide on page 12.
This section provides information on how to set up and start
using your GDB 5 once you have connected up as described on
pages 5 and 6. For further details on using your GDB 5 see the
other sections in this manual.