Goodmans GDB5, Introduction Manual

Page: 15 / 24

15
The Timer Record menu enables you to set your GDB 5 to switch
on (if in standby mode) and tune to a channel for a set period of
time. You can use this to record programmes to your VCR even
when you are not watching TV.
You access the Timer Record function from the main menu by
selecting the Timer Record icon. You see a list of recordings set.
Note This facility does not program your VCR to record the
programme. You need to set your VCR manually to do this. Make
sure that you set the VCR to record from AV or AUX for recording
from an external source. Check your VCR manual for details.
Note Your GDB 5 will automatically tune to the channel you
selected at the time you set. You cannot watch other digital
channels whilst a record timer is active, however, you can switch
to analogue TV and watch analogue channels by pressing the
STB button.
You add or delete recordings from this list as described below:
Adding or editing a timer event
1. Press the green (Add) button.You see the Add Program
popup.
2. Press the up and down arrows to scroll between Channel,
Date, Start time, End time and Duration settings.
3. Press the left and right arrows to increase or decrease the
value of each of these settings.
Timer record