GDB01SFV1
Time Settings
Timer Mode. When set to AUTO the system’s time settings will
be obtained from the transmission signal. To set manually use
the / (O, 06) buttons to select MANUAL.
1. Scroll down to the DATE setting using the / (N, P)
buttons. Press the / (O, 06) buttons to activate the
calendar screen, where you use a combination of the / /
/ (O, 06, N, P) buttons to navigate the calendar until you
find the correct date. Press the ENTER (05) button to store
the date.
2. After scrolling down to the TIME setting use the / (O, 06)
buttons to select the digit you wish to change. Press the
relevant numeric key (H) for the number you wish to enter.
Press either / (N, P) buttons to store the setting.
3. GMT OFFSET is only available when the TIMER MODE is
set to AUTO. Use the / / / (O, 06, N, P) buttons to
set your GMT offset zone. Leaving on AUTO sets the zone
depending on the transmission.
4. The SUMMER TIME setting is only available when the GMT
OFFSET option is set to anything but AUTO. Use the /
(O, 06) buttons to cycle between on & off.
Wake Up Timer Settings
The wake up timer allows you to set a reminder when a
programme is about to start, or for timer recording to a PVR or
VCR device.
Timer NO
. This allows you to set up to 8 wake up timers.
Timer Mode
. Set to OFF, ONCE, DAILY, WEEKLY or YEARLY.
Wake up Mode
. Select from OFF, MESSAGE, CHANNEL or
ON.
Wake up Channel
. Select the channel you wish to view.
Wake up Date
. Use the displayed calendar to select the date
for the wake up operation.
On Time
. Sets the time the wake up operation will start.
5.4
5.5
Group
CH-
CH+
VOL-
ENTER
VOL+
Group
CH-
CH+
VOL-
ENTER
VOL+