1 1
14. FM OPERATION
Auto Tuning
1. To select FM, repeatedly press the FM/DAB
button, until the display will shows "Switching
to FM" and the unit will then automatically tune
to the nearest station. On the top half of the
display will show the station name or the
frequency if the RDS station name is not available.
(F.10) (F.11)
2. To activate auto search up, press the
AUTOTUNE button, the unit will start scanning
up the frequency band and stop automatically
once a station has been found.
3. Press and hold the AUTOTUNE button to
scan down the frequency band.
)
)
Manual Tuning
To manually search, repeatedly press the SELECT UP or DN button, until the required station is found.
Mono /Stereo
This unit will receive the selected station automatically in stereo if broadcasted in STEREO and the
reception is strong enough. If this stereo reception has a large amount of noise (hiss), press the
SELECT button until MONO is shown on display. To return to stereo reception press the SELECT
button until auto is shown.
Presets
You can store up to 4 of your favourite stations to the preset; this will enable you to get access to your
favourite station at a touch of a single button.
1. To store a preset, first tune to your desired station, then press and hold your preferred PRESETbutton
(1 - 4) until the display shows "Preset & stored".
2. To recall a preset station, press the PRESET button (1 - 4) that you have stored.
3. If you press a preset that has not been allocated a station, the display will show "Preset & empty".
Note : Each preset will hold 1 DAB and 1 FM station.
