Goodmans DM0596-540MP32 Instruction Manual Download Page 6

8. LOCATION OF CONTROLS

9. CD PLAYBACK

1. Slide OPEN knob to open the CD door.
2.  Insert the CD with the printed side facing upwards and push the disc gently until locks

into place.

3. Press the CD door to close.
4. Slide the CD/RADIO switch to CD position.
5. Press 

 button to play.

When button is pressed at initial start up, the disc will begin to spin and after several
seconds,then it will proceed to start playback automatically from track 1.

To review the total number of tracks on the disc, press   button once.

During PLAY mode
The track number of the current selection is displayed.

the No. of track being played

During PAUSE mode
The elapsed time of the current track will flash.

The elapsed time of the current track will fash.

If no disc is inserted into the player and the 

 button is pressed, the display will show “ NO DISC ”.

1. MODE / PROG. / MEM. BUTTON
2. DIR. UP / PRESET UP BUTTON
3. DIR.DN / PRESET DN. BUTTON
4. RECHARGE INDICATOR
5. LCD DISPLAY
6. SKIP / SEARCH DN./ TUNING
    DN BUTTON
7. SKIP / SEARCH UP / TUNING
    UP BUTTON
8. PLAY / PAUSE  / FM MO / ST BUTTON

(CD POWER ON)

9. STOP BUTTON (CD POWER OFF)
10.OPEN KNOB
11.CD / RADIO SWITCH
12.HEADPHONE SOCKET
13.VOLUME
14.B.B.S. SWITCH (BASS BOOST
     SYSTEM)
15.RECHARGE SWITCH
16.DC SOCKET
17.HOLD SWITCH
18.BATTERY COMPARTMENT

Summary of Contents for DM0596-540MP32











Reviews: