TABLE OF CONTENTS
Power Sources Normal Batteries /AC adaptor..1
Use of Rechargeable Batteries…..............…...
.
2
Earphones Connection….......................……...3
Player Maintenance....................................…..4
Disc Cleaning and Troubleshooting Guide…....5
Product Specifications….........................……..6
Play Operation(see reverse of this sheet)
Basic Disc Play……......................................…7
Location of Controls….................................….8
CD Playback ...................................................9
MP3-CDs playback .................................…...10
Various Playing Modes ..................................11
Repeat and Intro Scan Play Modes…........….12
Random Play……......................................….13
Programmed Track Play…….........................
.
14
Digital Anti Shock Operation………..........…..
.
15
Listening to the Radio ...................................
.
16
BOX CONTENTS
1x CDMP3720PLL
1x Set of Earphones
1x AC adaptor
1. POWER SOURCES NORMAL BATTERIES/AC ADAPTOR
Battery Power Operation
1. Open the battery compartment cover
and insert two “AA” alkaline batteries
(not supplied) inside the battery comp-
artment. Follow the polarity as indicat-
ed on the bottom of the cabinet.
2. Close the battery compartment cover.
Battery Type
Average Playing
Time (Continuous Play)
Alkaline MN
1500 LR 6 or
10 Hours(MP3 CD playback)
Equivalent.
6.5 Hours(Audio CD playback)
Ni-MH
About 8 Hours
rechargeable
(min.
specification
recommended
1.2V - 1800mA)
Note: Zinc./Carbon, or Zinc/Chloride type
batteries are not recommended for this unit
as their use will result in extremely short
playing times. Wherever possible and for
economy it is recommended that the mains
adaptor supplied with this unit is used.
SAFETY PRECAUTIONS
1. As the laser beam used in this compact
disc player is harmful to the eyes, do
not attempt to disassemble the casing.
2. Stop operation immediately if any liquid
or solid object should fall into the
cabinet. Unplug the unit and have it
checked by qualified personnel.
3. Do not touch the lens or poke at it. If
you do, you may damage the lens and
the player may not operate properly.
4. Do not put anything in the safety slot .
If you do, the laser diode will be ON
when the lid is still open.
5. If the unit is not to be used for a long
period of time, make sure that all power
sources are disconnected from the unit.
Remove all batteries from the battery
compartment, and unplug the AC
adaptor from the wall outlet. Make it a
practice to remove the AC adaptor by
grasping the main body and not by
pulling the cord.
6. The unit employs a laser. The use of
controls or adjustments or performance
of procedures other than those
specified herein may result in exposure
to hazardous radiation.
AC Operation
1. Insert the DC plug at the end of the AC
adaptor cord into the DC input socket
in unit.
2. If non rechargeable batteries are
inserted,ensure that the recharge
switch is in the off position when con-
necting the AC adaptor. Failure to do
this may cause the non-rechargeable
batteries to explode.
3. Plug the AC adaptor into a 230V AC
power outlet socket.
