1. Insert the power adapter to the 5V DC Micro USB port on your
DAB / FM Radio, or insert 4 x 1.5V AA batteries in to
battery compartment (4 x 1.5 AA battery not included).
2. Insert the power adapter into a suitable mains socket.
3. Slide the ON/OFF switch button on the back of your DAB / FM
Radio.
Quick Setup
3
Connecting the Power
3.1
1. Extend the telescopic antenna for the best reception possible.
2. Make sure the DAB DIGITAL/FM Radio has been switched ON.
3. When powering on for the first time, the radio will perform a DAB
station scan automatically. After that the radio will tune in to the
last station played before it was turned off.
Using your DAB / FM Radio
3.2
When you slide the ON/OFF switch button to ON the DAB
DIGITAL/FM Radio again after a switch off. It will automatically tune
into the same station (DAB of FM) that was last selected. Make
sure it is DAB mode.
Operation
4
DAB Operation
1. Extend the telescopic antenna for the best reception possible.
2. Slide the OFF/ON switch to the ON position on the back of your
DAB Radio to power up the DAB Radio.
3. A full scan will automatically commence. The unit will search for
all available DAB stations.
4. Press the Power/Mode button to switch between DAB and FM
modes.
5. Press the VOL+ and VOL- control button to increase / decrease
the volume.
6. During scanning the screen will display a slide bar that indicates
the progress of the scan, and the amount of radio stations that
have been found so far. Once the scan has finished, the radio
will select the first alphanumeric station.
7. Slide the ON/OFF switch button to OFF position to turn the DAB
DIGITAL/FM Radio off.
Note: Press and hold Power/Mode button and unit will go to standby
mode. Press the Power/Mode button to turn on from standby mode.
Full Scan
4.1
