Operation
5
No sound.
The station is not tuned in. Fine tune
the station.
The volume is set to a low position.
Increase the volume.
FM: Static sound
DAB+: Burbling/
intermittent cut-out.
Signal reception is too low.
Adjust the aerial or move the unit to a
stronger signal location.
Rescan stations.
Problem
What to do
Sound is distorted.
The volume is too high. Adjust the
volume control.
Desired station
not found short.
Weak signal. Use the manual tune
function.
Display shows
“No Service”.
There is no DAB+ coverage in your
area, or poor reception. Adjust the
position of the aerial, or move the
unit to a stronger signal location.
Display is blank.
This may occur if the broadcaster
changes the label of a service or
removes a label while tuned. The
unit will try to retune or perform a
scan.
