INTRODUCTION
9
I
NTRODUCTION
This Quick Start Guide is intended as a fast introduction to
operating the GSB-01/02 scanner boxes with the GPT-9000 safety
testers. This Quick Start Guide assumes that the user is familiar
with the GPT-9000 series safety testers.
For comprehensive instructions, please see the User Manual,
located on the accompanying CD.
Series lineup
The aim of these scanner boxes is to allow multiple DUTs to be
tested either concurrently or in sequence using the GPT-9800, GPT-
9900 or GPT-9900A safety testers. The scanner boxes are
particularly well suited for multi-point safety testing as well for
volume testing on factory floors.
The GSB-01 has connections for ACW, DCW and IR testing, while
the GSB-02 also includes support for GB testing.
Firmware Note
Please make sure the firmware is up to date before using the
scanner boxes. Please see the user manual to check the firmware
version.
GPT-9800: firmware version V3.0 or above
GPT-9900/9900A: firmware version V2.0 or above
Note: Throughout this guide, the terms scanner box or GSB will
refer to either model (GSB-01, GSB-02) unless specifically stated
otherwise. GPT-9000 will refer to any of the GPT-9800, GPT-9900 or
GPT-9900A safety testers, unless stated otherwise. HV and H will
refer to High Voltage terminals, while LO and L will refer to the
return terminal.
