GSB-01/GSB-02 Quick Start Guide
14
Test Lead Connection
This section describes how to connect the GPT-9000 to a number of
scanner boxes. It is recommended that only models of the same
type are connected together.
Connecting GSB-01 Units
WARNING
Ensure the safety tester is off when connecting the
scanner boxes to the safety tester.
When wiring the GSB-01scanner boxes to the
safety tester or to each other, only the HV wiring
leads (GHT-108) should be used.
Front Panel
1.
Connect the High Voltage terminal on the
safety tester to the High voltage terminal on the
1
st
scanner box, as shown below.
2.
Connect the return terminal on the safety tester
to the return terminal on the 1
st
scanner box.
3.
Connect the return terminal on the 2
nd
scanner
box to the return terminal on the 3
rd
scanner
box.
