Goobay®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2021-07-05
V1.0cl
95674
All-in-one card reader USB 2.0
1 Safety instructions
The user manual is part of the product and contains important information for
correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
•
Keep this user manual.
• Do not open the housing.
•
Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
A defective device may not be put into operation, but must be protected
against further use.
•
Use product, product parts and accessories only in perfect condition.
•
Avoid stresses such as heat and cold, moisture and direct sunlight, mic
-
rowaves, vibrations and mechanical pressure.
•
In case of questions, defects, mechanical damage, trouble and other
problems, non-recoverable by the documentation, contact your dealer or
producer.
• Do not drop the product.
• Do not cover the product.
Not meant for children. The product is not a toy!
•
Secure packaging, small parts and insulation against accidental use.
To avoid damage to the device and the memory cards:
•
Never insert more than one card into the designated card slot.
2
Description and function
2.1 Product
The USB 2.0 all-in-one card reader with 6 card slots is used to read SD me
-
mory card formats
○ Read speed of over 480 Mbit/s
○ Fast data transfer thanks to Hi-Speed USB 2.0 connection
○ Supports plug & play and hot swapping
2.2
Scope of delivery
All-in-one card reader USB 2.0, User Manual
2.3
Operating Elements
1
M2 (Memory Stick Micro) card slot
2
Operation LED
3
MiniSD/SD MMC/RS MMC
card slot
4
CF/Micro Drive card slot
5
USB 2.0 connector
6
MicroSD card slot
7
MS Duo/MS ProDuo/MS card slot
8
XD card slot
2.4
Specifications
Article number
95674
C
onnections
USB 2.0 connector, M2 (Memory Stick Micro) card
slot, MiniSD/SD MMC/RS MMC card slot,
CF/Mico Drive card slot, MicroSD card slot,
MS Duo/MS ProDuo/MS card slot, XD card slot
Input voltage
5 V
Data transfer rate
Max. 480 Mbit/s
Compatible with
X-Memory, RS MMC, SD, MMC, Mini SD, M2 (Me
-
mory Stick Micro), MicroSD, CF, Micro Drive, MS,
MS Pro, MS Duo, MS Pro Duo memory cards,
USB 1.1, USB 2.0
System
requirements
Windows 2000, XP, VISTA 7, 8, 10.
Dimensions (mm)
62 x 54 x 16
Weight (g)
35
Cable length (cm)
2.5
3 Intended use
We do not permit using the device in other ways like described in
chapter "Description and Function" or in the "Safety Instructions".
Use the product only in dry interior rooms. Not attending to these
regulations and safety instructions might cause fatal accidents, injuries, and
damages to persons and property.
4
Preparation
1.
Check the scope of delivery for completeness and integrity.
2.
Compare the specifications of all used devices and ensure compatibility.
5
Connection and operation
1.
Plug the card reader into a USB port on your PC/notebook.
Wait approx. 5 seconds until the device has been recognized.
2.
Choose the right card slot.
3.
Insert a suitable memory card into the card reader.
Make sure that it is correctly seated. Depending on the design, it may be
necessary to use a memory card adapter.
4. Do not remove the card reader until there is no more memory card in it.
Otherwise, data may be lost.
The operating LEDs indicate whether the card reader is ready for operati
on, not connected or in data exchange.
LED off:
device disconnected (not recognized by the PC)
LED red:
ready for operation (no card in the device)
LED red + blue: ready for operation (card in device)
LED red lights up/
blue flashes:
data exchange between card and PC/notebook
6
Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE!
Material damage
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents or chemicals.
•
Store the product out the reach of children and in a dry and dust-protec
-
ted ambience when not in use.
•
Store cool and dry.
•
Keep and use the original packaging for transport.
7
Disposal instructions
7.1 Product
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its compo
-
nents must be recycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can damage the health and
pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic
devices to the producer, the dealer, or public collecting points at the end of the
devices lifetime for free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste disposal of used
devices you achieve an important share to environmental protection.
WEEE No: 82898622
7.2 Packaging
Packaging can be disposed of free of charge at the suitable collection
points – paper belongs in paper bins, plastics belong in yellow sacks
and glass belongs in used glass bins.
DE4535302615620
8 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic
GmbH ensures, that the product is conformed to the basic European
standards and directives.
9 Symbols used
For indoor use only
IEC 60417- 5957
Recycling
ISO 7001 - PI PF
066
Direct current
IEC 60417- 5031
- 2 -
Subject to change without notice.
User Manual
EN
