EN
- 3 -
User Manual
Automatic HDMI™ switch, 4K
Goobay
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2017-10-09
V1.1
58971
1
Safety Instructions
1.1 General
•
Read the user manual completely and carefully before use.
The user manual is part of the product and contains important information
for correct use.
•
Keep this user manual.
The user manual must be available for uncertainties and passing the
product.
Risk of electric shock:
• Do not open the housing.
• Do not modify product and accessories.
• Do not short connectors and circuits.
• Use product, product parts and accessories only in perfect condi
tion.
A defective device may not be put into operation, but must be disconnec
ted from mains and protected against further use.
Target group information:
Not meant for children.
•
Secure packaging, small parts and insulation against accidental
use.
Heat
storage:
•
Do not cover the product
.
• Keep enough space around all devices for a good ventlation and
free motion and to avoid damages.
1.2
Warning levels
Warnings against hazards that ma
y result in injuries in case of
non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2
Description and Function
2.1 Product
The Automatic HDMI™ switch is provided for audio-/video use for home entertain
-
ment systems. It enables you to connect 3 source devices to one high definition
display (e. g. HDTV).
•
Automatically switches between three HD signals, with priority
given to the most recent signal.
•
With HDMI™ und HDCP pass-through
•
With LED status display
•
Simple installation and operation
•
24K gold plated connector
2.2
Scope of delivery
Automatic HDMI™ switch, user manual
2.3
Operating elements and product parts
1
2
3
4
Fig. 3:
Operating elements
1 HDMI™ output plug
2 HDMI™ inputs
3 Selection button
4 LED status indicator
2.4
Specifications
Automatic HDMI™ switch
Article number
58971
Inputs
3 x HDMI™
Outputs
1 x HDMI™
Input video signal
0.5 - 1 V
~
Input DDC signal
5 V
~ (TTL)
Maximum single link range
3840 x 2160 @ 30 Hz
Signal sources
compatible with
HD-DVD, SKY-STB, PS3, Xbox36
Video formats supported
DTV, HDTV
Frequency
up to 340 MHz
Interlaced
480i, 576i, 1080i
Progressive
480p, 576p, 720p, 1080p, 2160p
Audio formats
3D, DTS Digital, Dolby Digital (including DTS-HD
and Dolby True HD)
Operating temperature
0 ~ +40 °C
Operating humidity
10-85 % RH (no condensation)
Storage temperature
-10 ~ +80 °C
Storage humidity
5-90 % RH (no condensation)
Power requirement
HDMI™ BUS powered
Dimensions
82 x 61.5 x 16.5 mm
Weight
121 g
Tab. 2:
Specifications
3
Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4
Connecting and Operating
Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be disabled and the
cable not be damaged.
• Install the system and devices attached to it in a way that persons
cannot be injured, or objects not be damaged for example by drop
ping
or
stumbling.
Material damage due to wrong placement and wrong
voltage supply
•
Only place on non-slipping surface.
•
Use only the supplied power supply.
4.1
Connecting
1.
Check the scope of delivery for completeness and integrity.
2.
Compare the specifications of all equipment be used and
ensure
compatibility
3.
Connect the outputs of the source devices to the inputs (2) of
the HDMI™ switch.
4.
Comnnect the inpuit of the output device to the output plug (1)
of the HDMI™™ switch.
HDTV
OUT
IN 1
IN 2
IN 3
DVD
DVD
DVD
Fig. 4:
Connecting
4.2 Operating
a) Intelligent switching function:
•
When connecting a source device to the switcher or switching on
an already connected source device, the switcher changes to this
channel automatically and selects the new device in that way.
The selected channel will be shown by the corresponding LED.
•
When switching off or disconnecting a source device, the switcher
auto matically changes to the next connected source device in
order:
1 - 2 - 3
In case of switching a source device into stand-by mode, the switcher is not able to
use the intelligent switching function. That‘s why switch off the source device
completely or disconnect it from mains.
b) Manual switching function via selection button :
•
Also adjust the switcher manually by using the SELECT button for
selecting the preferred channel. The channels change in order of:
1 - 2 - 3
•
The selected channel is signalized by the corresponding LED
.