25
Maximum transmitting power
14dBm(V-Band),10dBm(U-Band)
Modulation
FS-FHSS selected frequency modulation, pi/4 DQPSK+GFSK digital modulation modulation.
Frequency response range
Unit- server unbalanced output frequency response curve frequency response range: 60Hz-
20kHz(
±
3dB)
Unit-unit monitoring output frequency response curve frequency response range: 65Hz-16KHz
(
±
3dB)
Audio coding
ADPCM
4.5 Installation Rules
As a wireless communication device, the DCS3024 should be installed in accordance
with requirements of wireless communication products. Remove any obstacle set
between the wireless communication devices (communication range will be narrowed
by obstacles) and remove any metal around (wireless signal is easily interfered by
metals, especially aluminum). The wireless devices shall be kept as least 1~2m away
from electronic products (electronic products such as starter, air conditioner, microwave
stove, and TV set will emit radio wave which will interfere with wireless signal).
The degree of impact on radio signals varies with the different kinds of materials:
Minor impact – glass, wood, gypsum, asbestos
Major impact – water, brick, stone
Completely block – marble, cement, concrete, metal
The following instructions should be followed when you are installing the wireless AP
WAP-30C.
