3
SPECIFICATIONS
Model Name
SP-5004VZC
Technical
Role of usage
1x4 Distribution Amplifier (Splitter)
HDMI compliance
HDMI 2.0a
HDCP compliance
Yes
Video bandwidth
Single-link 600MHz [18Gbps]
Video support
HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
Transmission over
UTP cable
1080p@60 60m (198ft) [CAT5e]
4K2K@60 (4:4:4 8bit) 35m (114ft) [CAT5e]
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Human body model
— ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB stack-up
4-layer board [impedance control
— differential 100Ω; single 50Ω]
Input
1x HDMI + 1x 3.5mm
Output
2x HDMI + 4x RJ-45[HDBaseT] + 1x 3.5mm
IN/ OUT
1x RS-232
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary switch
Yes
3.5mm connector
IR receiver / IR blaster
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
298 x 150 x 27mm [11.7" x 5.9" x 1"]
Package
376 x 240 x 112mm [1'2" x 9.4" x 4.4"]
Carton
590 x 510 x 405mm [1'9" x 1'7" x 1'3"]
Weight
Model
1342g
[3lbs]
Package
2097g
[4.6lbs]
Fixedness
1RU rack-mounting case with ears
Power supply
12V 7.5A DC
Power consumption
55Watts [MAX]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
4
PANEL DESCRIPTIONS
Front Panel
1.
Power LED:
Power indicator
2.
Micro-USB:
For technical support only [firmware update]
3.
HDMI Signal LED:
From the left side to the right is Input, loopout1 and loopout2
4.
Link Receiver LED:
Link LED indicator 1-4
5.
HDMI Signal LED at Receiver:
Output signal LED indicator 1-4
Rear Panel
6.
+12V DC:
Connect to the +12V DC power supply unit
7.
EDID Management Rotary control:
MODE 0
Ultra HD(4K2K@60)
– 8/10/12bit 3D HDR video & 7.1ch audio
MODE 1
Ultra HD(4K2K@60)
– 8/10/12bit 3D HDR video & 2ch audio
MODE 2
Ultra HD(4K2K@30)(4K2K@60 420)
– 8/10/12bit 3D HDR video & 7.1ch audio
MODE 3
Ultra HD(4K2K@30)(4K2K@60 420)
– 8/10/12bit 3D HDR video & 2ch audio
MODE 4
Full-HD(1080p@60)
– 12bit 3D video & 7.1ch audio
MODE 5
Full HD(1080p@60)
– 8bit 2D video & 2ch audio
MODE 6
Learning EDID from loopout #1
MODE 7
Auto EDID analysis learning mode
8.
RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND (from the left side to the
right)
9.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
10.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
11.
HDMI IN:
Connect to a HDMI input source
12.
HDMI LOOPOUT #1:
Connect to a HDMI display with a HDMI male-male cable here
