background image

 

Safety and Notice 

The 

SP-5004IZ 

1x4  HDMI  2.0aSplitter  with  Built-in& User Adjustable EDID  Management

  has 

been tested for conformance to safety regulations and requirements, and has been certified for 

international use. However, like all electronic equipments, the 

SP-5004IZ

 should be used with care. 

Please read and follow the safety instructions to protect yourself from possible injury and to minimize 

the risk of damage to the unit. 

● Follow all instructions and warnings marked on this unit. 

● Do not attempt to service this unit yourself, except where explained in this manual. 
● Provide proper ventilation and air circulation and do not use near water. 
● Keep objects that might damage the device and assure that the placement of this unit is on a 

stable surface. 

● Use only the power adapter and power cords and connection cables designed for this unit. 
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device 

before cleaning. 

 

TABLE OF CONTENTS 

INTRODUCTION ................................................................................................................. 1

 

FEATURES ......................................................................................................................... 1

 

PACKAGE CONTENTS ...................................................................................................... 1

 

SPECIFICATIONS .............................................................................................................. 2

 

PANELDESCRIPTIONS ...................................................................................................... 3

 

DIP SWITCH SETTING ....................................................................................................... 4

 

HARDWARE INSTALLATION ............................................................................................. 4

 

CONNECTION DIAGRAM ................................................................................................... 5

 

NOTICE............................................................................................................................... 6

 

WARRANTY ........................................................................................................................ 7

 

 

 

Summary of Contents for SP-5004IZ










Reviews: