~ 5 ~
Inputs and Outputs
The MX-1010 has nine inputs and accepts two graphics and seven video signals. There is a concept of main
channel and sub channel for this device. You can pick up two of the nine inputs, one is for main channel and the
other is for sub channel. To display two of them simultaneously on the same screen, the two chosen videos must
be from digital and analog inputs, or the same source. Except DVI, any other video sources are analog. Figure 2
shows the connectors on the rear panel of MX-1010 while Table 1 and 2 list separately the available video and
audio inputs of the MX-1010.
Figure 2: Rear Panel
These IO ports support various resolution from 640x480 up to 1920x1200, for more detail of the
supported modes, please refer to the Appendix for supported resolutions.
Table 1: Input/Output Connectors
Input Connector
Video Input
DVI-IN
DVI
VGA-IN
VGA
S-Video-IN
2x S-video
CVBS-IN
2x composite (yellow)
YPbPr-IN
2x component
Audio Input
Audio-IN
Audio for DVI-IN or VGA-IN
CVBS-IN
Composite & S-video (red & white)
YPbPr-IN-Audio
Component audio
Device Control
RS-232
RS-232 control port
Output Connector
Audio/Video Output
DVI-I-OUT
VGA & DVI dual video output
Audio-OUT (RCA)
Stereo analog output
Audio-OUT (Earphone)
Stereo analog output
