background image

~ 7 ~ 

 

Connections 

We recommend the highest quality cables for both input and output connections. 

1.

 

Switch off the MX-1010 and all devices that you want to connect. 

2.

 

Connect a monitor, a projector or other displays that comes with DVI or VGA inputs by using a male-to-male 
DVI (VGA) cable to MX-1010 DVI output (you can connect 2 displays equipped with DVI and VGA respectively 
by a DVI to DVI&VGA breakout cable 

(DDVY01)

). 

3.

 

Plug in video sources to the desired input connectors. 

4.

 

Connect a device equipped with DVI output (such as a PC) to the DVI connector of the breakout cable. 

5.

 

Connect a device equipped with VGA output (such as a laptop) to the VGA connector of MX-1010 

6.

 

Connect your computer with the MX-1010 by a 9-pin RS-232 adapter and then install the software. 

7.

 

Plug in power adapter cable into 5V DC power jack. 

8.

 

Switch on all devices connected and then switch on t

he video processor and then press “menu‖ to display 

OSD menu. 

9.

 

Press down source key or video hot keys to switch among all the video/graphic sources. 

10.

 

Once the Main Channel has a video selected, the corresponding audio is automatically set. 

11.

 

In PIP or PAP mode, use hot keys designed for PIP or PAP on the top of IR remote controller. 

12.

 

For  detailed  IR  remote  control  operation,  please  refer  to  the  On  Screen  Display  menu  and  IR  operating 
instruction. 

Summary of Contents for MX-1010




















Reviews: