7
OPERATION APPROACH
Method A: Push-in Button
1. IN/OUT MAP
(1)
Use the “+” or “-“ output push button to select the number of display
(2)
Use the “+” or “-“ input push button to select the number of input source
“+”: change selected input/output port in ascending order
“-”: change selected input/output port in descending order
After you select the desired input/output port, the LED will blink twice and the setting will be effective
Method B: IR Remote Control
Button
Function
OFF
Standby mode
ON
Power on the matrix switcher
MUTE
Turn off output
’s video and audio
STATUS
Preset output status
SAVE
Save current mapping mode
PRESET
Preset mapping mode
DEFAULT EDID
Begin default EDID selection
LEARN EDID
Begin EDID learning from one output
CLEAR
Clear the previous IR operation procedure
TAKE
Trigger the previous setting
F1
Reserved
F2
Reserved
1. IN/OUT Switch
Operation
Procedure
7-Segment
LED
IN/OUT Switch
Push the button on the checkerboard
to select input & output port
Ex: Input 2
To Output 3
Push the red circle button as below to
select input 2 to output 3
3
2
8
2. Example of function key
Operation
Procedure
7-Segment LED
Output Status
A~D(Output 1~4) + Clear
Ex: Output 4
(Input 2)
1.Press “STATUS” button
-
-
2.Press number key “D” to select Output 4
4
3.Press “CLEAR” button
Save Current Mapping
Save
+
A~H(1-8 storage site)
+
Take
Ex: Save current
mapping to 5
1.Press “SAVE” button
d
-
2.Press number key “E” to select the storage site 5
d
5
3.Press “TAKE” button
Preset Mapping
A~H(1-8 storage site) + Take
Ex: Preset saved
mapping from 5
1.Press “PRESET” button
P
-
2.Press number key “E” to select the storage site 5
P
5
3.Press “TAKE” button
Learn default EDID
Default EDID
+
A~H(1-8 default EDID)
+
I~IV(input
1~4)
+
Take
Ex: Default EDID 2
Input 3
1.Press “DEFAULT EDID” button
E
d
2.Press number key “B” to select default EDID 2
2
d
3.Press number key “III” to select Input 3
2
3
4.Press “TAKE” button
0
or
F
0 (success)
F (fail)
Learn Output EDID
Learn
+
A~B(Output 1~2)
+
Ⅰ
~
Ⅳ
(input 1~4)
+
Take
Ex: Learn Output 4
Input 3
1.Press “LEARN” button
E
L
2.Press number key “D” to select Output 4
4
L
3. Press number key “III” to select Input 3
4
3
4.Press “TAKE” button
0
or
F
0 (success)
F (fail)
Mute Output
Mute
+
A~B(Output 1~2)
+
Take
Ex: Mute Output 3
1. Press “MUTE” button
-
0
2. Press number key “C” to select Output 3
3
0
3.Press “TAKE” button
0
3
Method C: Software Control through RS-232 port / Ethernet port
