5
IR PASS-THROUGH
IR Extenders
IR Blaster
IR Receiver
IR Sockets
MA-5544V
All IR Out:
The default location for IR blaster to transmit all IR command signals received from any of the
one remote receivers to all of the HDMI sources.
IR BLASTER 1-4:
IR blaster connected here can only transmit IR command signals from the remote
receivers that are setting at respective input channel from 1 to 4.
System IR:
Receives IR commands from remote control
IR RECEIVER 1-4:
Receives IR commands from individual remote control
Definition of IR Earphone Jack
IR Blaster
IR Receiver
You can buy any IR extension cables in the market that are compatible to the definition of
the IR sockets for the matrix if necessary for replacement use. However, IR cables longer
than 2m (6-ft) may not work.
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check
carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage.
CAUTION!
6
CONNECTION DIAGRAM
