Receiving unit ► CV-57VE2-100-RX
Front Panel
12. RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit TX.
13. LED:
TX/RX link indicator
14. Ethernet port for LAN:
Connect to network device
15. DIP Switch:
PIN#1: Setup the RS-232 mode for serial communication channel.
PIN#2: For Firmware Update
16. RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
F/W update for Valens.
Rear Panel
17. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
18. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
19. HDMI OUT:
Connects to a HDMI display with a HDMI male-male cable
20. LED:
Power indicator
21. +24V DC:
Connect to a 24V DC power supply.
*
DIP Switch Position
DIP Switch Position
Description
TX & RX
PIN#1
ON [
]
TxD: The 2
nd
pin of RS-232, which is in charge of sending data
RxD: The 3
rd
pin of RS-232, which is in charge of receiving data
OFF [
]
TxD: The 3
rd
pin of RS-232, which is in charge of sending data
RxD: The 2
nd
pin of RS-232, which is in charge of receiving data
PIN#2
ON [
]
Firmware Update
OFF [
]
Normal
4
Summary of Contents for CV-57VE2-100
Page 9: ...CONNECTION DIAGRAM 7...
