6. Fail-Safe Setting
Setting & saving the setting into on board MCU to ensure the stability during transmission.
6.1 Through this manual setting, the device will be able to re-set once the selected
conditions are fulfilled at the same time, this will ensure the quality and stability when
signals transmission.
6.2 Sensitivity for fail-safe mechanism.
6.3 quality in wire, please choice 48, vice versa
6.4 Select the STD for video error, according to HDMI association, the tolerance of Bit
Error in transmit should be less than 10
-9
,we use -9 to stand for this, so if you are in
high tolerance in signals transmit error, please choice -8 for standard.
15
Summary of Contents for CV-57VE2-100
Page 9: ...CONNECTION DIAGRAM 7...
