GoMax Electronics CV-57VE2-100 User Manual Download Page 3

INTRODUCTION 

The 

CV-57VE2-100 

boosts up your video/audio transmission distance up to 100m (330ft) in HDTV 

1080p with 48-bit color depth.  CV-57VE2-100  also supports the most advanced 3D video format 
complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the 
market. With only one cost effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD 
players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant 
display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. With the advanced design 
for the latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports 
and compatibility are all further insured. This flexibility makes HDCP compliant DVD players or PS3 
transmit utmost high quality video and audio with a greater distance at the minimal cost, when integrating 
several components apart. In addition, CV-57VE2-100  is also equipped with bi-directional IR 
pass-through path and RS-232 serial port control. These bonus features allow users to boost IR control 
distance up to 100m (330ft) and make IR control possible through only single Cat.5/5e/6 cable including 
HDMI signals. In addition, serial port offers the convenient path for interactive application, such as touch 
panels. In addition, CV-57VE2-100 also supports POC (Power over Cable) which can power both units 
from TX or RX with power supply. 

The  CV-57VE2-100

 

includes two units: transmitting unit CV-57VE2-100-TX and receiving unit 

CV-57VE2-100-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control 
packets. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing 
IR and serial control signals. CV-57VE2-100

 

offers the most convenient solution for digital signage with 

long distance A/V transmission path, and with 10G transmission  bandwidth  ready,  CV-57VE2-100

 

is 

ready for your next HDMI generation and applications! 

 

FEATURES 

●  Supports HDMI Deep Color, full 3D & 4K2K@30 (HDBaseT technology) 
●  Extends the transmission up to 100m (330ft) from the HDMI source at Full HD 1080p 48-bit and 80m 

(264ft) at 4K2K@30 

●  Supports POC(Power over Cable) which can power both units from TX or RX with power supply. 
●  HDCP & EDID Bypass 
●  CEC support 
●  Auto equalization 
●  Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission 
●  DTS-HD Master Audio and Dolby TrueHD high bit rate audio support 
●  Supports full frequency IR signal from 20KHz to 60KHz   
●  Bi-directional IR path-through 
●  Full Duplex RS-232 control up to 115,200 bps through connector 
●  Integrated port for LAN/ network device 
●  Wall mounting housing design for easy and robust installation 

 

PACKAGE CONTENTS 

●  1x CV-57VE2-100 [TX & RX] 
●  1x IR blaster 
●  1x IR receiver 
●  1x DC 24V   
●  1x User Manual 

 

1

 

Summary of Contents for CV-57VE2-100





















Reviews: