12
FS 250 B
13
Information: Clean all fastening devices of the blade (flanges, thread of the
blade shaft, screws and nuts) before mounting the blade!
n
Remove the toggle of the main switch in the control panel or disconnect the power supply before mount-
ing or changing blade.
n
Check the blade is well fastened before beginning to operate.
n
Use only blades suitable to the blade acceptance (arbor hole, flanges).
n
Use only blade suitable to the material to be cut.
n
Check the correct water flow to the blade.
n
If harmful or explosive stuffs like dust, milk-of-lime arise while cutting, observe local regulations.
n
The working area is reserved only for the operator. Keep unauthorized persons out of the working
area.
n
Make sure the operator always has well sight to the working area. He always has to intervene in the
working process.
n
Never operate the floor saw without mounted safety devices.
n
In the cutting speed range all used blades must be designed for the max. rpm of the floor saw.
n
Never use faulty or damaged blades.
Danger: Faulty or damaged blades can cause injuries to the operator and other
persons!
n
Check the correct rotation of the blade to the spindle shaft.
Information: Wrong rotation of the blade will result in more wear of the
blade!
Danger: Wrong rotation of the blade may result in segments cracking off and
can cause injuries to the operator or other persons!
n
When travelling on public roads, ways and places always observe the valid traffic regulations and, if nec-
essary, make sure beforehand that the floor saw is in a condition compatible with these regulations.
n
After operating secure the floor saw against unintentional moving.
Danger: Demolitioning parts can cause injuries to the operator while cut-
ting!
Danger: The sound pressure may exceed 85 dB(A)!
n
Appropriate to the application of the floor saw it could be necessary to wear further protective equip-
ment.
