6
INSTALLATION
RELAY UNIT TSAR-G2+
Relay unit assigned to access
panel 2 and lock release 1.
door
Relay unit assigned to access
panel 2 and lock release .
door
2
Relay unit assigned to access
panel
and lock release
door
3
1.
Relay unit assigned to access
panel
and lock release
door
3
2.
Relay unit assigned to access
panel
and lock release
door
4
1.
Relay unit assigned to access
panel
and lock release
door
4
2.
1
2
3
ON
4
1
2
3
ON
4
1
2
3
ON
4
1
2
3
ON
4
1
2
3
ON
4
1
2
3
ON
4
1
2
3
ON
Relay unit assigned to access
panel
and lock release 1.
door
1
Relay unit assigned to access
panel
and lock release .
door
1
2
Assigning of door panel and lock release control 1 or 2.
4
1
2
3
ON
4
Important:
- If the door panel has the lock release 1 connected, lock release 2 must be connected to the SAR-G2+ relay unit.
- If the door panel has the lock releas 2 connected, lock release 1 must be connected to the SAR-G2+ relay unit.
- Do not repeat the same lock release on both the panel and the SAR-G2+ relay unit.
- This operating mode allows activation of a Golmar additional alternating lock release. This lock release is activated as lock
release 1 or lock release 2 and with the panel that has been assigned (through configuration in SAR-G2
see
) during
+,
page 4
a call or communication process.
of corresponding icon
or
(
It will be activated by pressing the button located below
lock release 1 or lock release 2
respectively) shown on the
ART4 LITE/
/ ART7 LITE monitor screen,
corresponding
ART4/
ART7
by clicking on the
icon of the
ART 7W monitor displayed on the screen o
or
terminal or T-ART telephone.
r pressing the button
of the ART 1
- See user manual for
installed in the apartment
monitor/ audio terminal
.
-
The activation time is 3 seconds
Note:
(programmable by the installer).
Additional lock release activation relay (necessary power supply unit TF-104):
1
2
-The relay unit should be assigned to one of the 4 access panels that the system allows and define the push button of
lock release 1 or 2 of the telephone / monitor that will activate the relay unit.
- Note:
For the relay unit to activate in this operating mode, the assigned panel must be in a call or communication
process.
