INSTALLATION
5
RELAY UNIT TSAR-G2+
The relay unit can be mounted onto a DIN rail
(4 elements) by applying slight pressure.
To remove the relay unit from the rail, use a flat
screwdriver and lever it off, as shown in the
drawing.
Install the relay unit in a dry and protected location free from the risk of dripping or splashing water.
Install the SAR-G2 relay unit and SAR-12/24 together with the FA-G2 power supply unit.
+
+
Detail of the installation of the relay unit:
DIN 46277
Description of the
operating mode “S
”
tairs light activation relay (necessary module SAR-12/24):
- This operating mode allows activation of the stairs light from the apartment.
(
:
Dip 4
ON
Light operating mode Set the
to
and from the
to
to
i the configuration DIP switch of the
Dip1
Dip3
OFF n
SAR-G2+).
It will be activated by pressing the button located below the light con
on the screen in the settings menu
i
displayed
of the ART 4 / ART 4 LITE monitor, in the main menu of the ART 7 / ART 7 LITE monitor by clicking on the icon of the
,
ART 7W monitor displayed on the screen in the main menu
for 3 seconds
or pressing the
......
ART 1
button
of the
terminal
.
or T-ART telephone (in standby and handset on the hook on T-ART telephone)
- See user manual for monitor
installed in the apartment.
or terminal
-
The activation time is 3 seconds
Note:
(
).
programmable by the installer
1
2
3
ON
Relay unit configured for operating mode “stairs light activation”.
4
-
12258965
RELE SAR-G2+
V02
GOLMAR S.A.
C/ Silici, 13
08940-SPAIN
MADE IN CHINA
NC
BUS BUS
POWER
C NA
12+
AP1
-
CONTACTOS RELÉ /
RELAY CONTACTS
1A 18V AC
0.75A 24V DC
JP1
3
2
1
