8
Proximity reader programming (L)
Make sure the equipment is powered and the reader connected to the door panel (Q).
To be able to add user keys (up to 60) in the memory of the proximity reader, it is necessary to create a
programming key and a user registration key. In order to facilitate identification, we recommend using the yellow
key to program and the blue key to register users. Use the gray ones as user keys.
Creation of programming and registration keys.
NOTE: this process completely erases the memory of the proximity reader.
Press the programming button of the proximity reader (T): the door panel will emit six short tones. Before ten
seconds approach the programming key, emitting the door panel a short confirmation tone and right after the
user registration key, issuing the door panel a long confirmation tone. If after pressing the programming
button no key is approached within ten seconds, the door panel will emit a long tone, and the memory will be
completely erased.
Once the programming and registration keys have been created, the addition and deletion of user keys can be
done with the door panel closed.
Adding user keys.
Approach the registration key to the reader: the door panel will emit four short tones. Approach one by one the
user keys that you want to add, emitting the door panel a short tone for each key added. After ten seconds
have passed since adding the last key, the door panel will emit a long tone to confirm the completion of the
process.
Deletion of an user key.
Approach the programming key to the reader: the door panel will emit four short tones. Approach the user key
that you want to delete, emitting the door panel a long tone to confirm the deletion. After ten seconds, if there
is no key to delete, the door panel will emit a long tone to confirm the completion of the process. Repeat this
process to delete other user keys.
Deletion of all user keys.
Approach the programming key to the reader: the door panel will emit four short tones. Approach the registration
key, emitting the door panel a long tone to confirm the deletion of all the keys. After ten seconds, if the
registration key has not been approached, the door panel will emit a long tone to confirm the completion of the
process.
BUS
BUS
CV-
CV+
AP+
C
NA
GND CCTV AP-
ON
1
2
3
4
SOUL S5110/ART 7W VIDEO INTERCOM KIT
SOUL DOOR PANEL
All manuals and user guides at all-guides.com
