SAFETY PRECAUTIONS
O
O
O
O
O
O
O
O
Install or modify the equipment
.
The installation and handling of these equipments must be performed by
.
The entire installation must be at least
away from any
.
Do not use excessive force when tightening the connector screws.
Install the unit in a dry and protected place without risk of drip or water projections.
Avoid to place it near to heating sources, dusty locations, humid or smoky enviroments.
Do not block ventilation holes of the unit so that air can circulate freely.
To avoid damage, the repeater has to be firmly fixed.
without the power connected
authorised personnel
40 cm.
other installation
SYSTEM CHARACTERISTICS
O
w
w
w
O
w
w
O
O
O
O
O
O
In installations with 2 repeaters in daisy chain and 1 multiplexer the distances will be:
The repeater will increase the distance in 150 meters more.
Up to 2 digital repeaters connected in daisy chain.
Maximum distance between the power supply and digital repeater: 3 m., with a wire section of 1,5 mm.
Autodiagnostic leds showing the Bus status (in the riser where repeater is installed) and the power
supply status of the repeater.
The
monitor must be the version
or later, for its compatibility with the
repeater.
Use Golmar
cable in the
.
Tekna V2Plus Color
V.02
RAP-2150
V2Plus
system
Digital repeater for
system a
:
It increases the distance in 200 meters more.
In daisy chain installations (without distributors), it increases 16 monitors/telephones in a maximum
distance of 150 meters between the repeater and the last monitor/telephone and between
monitors/telephones of the different apartments (connected to repeater).
It increases 32 monitors/telephones in a maximum distance of 150 meters between the repeater
and the last monitor/telephone and between monitors/telephones of the different apartments
(connected to repeater).
In daisy chain installations (without distributors), it increases 16 monitors/telephones in a maximum
distance of 100 meters between the repeater and the last monitor/telephone and between
monitors/telephones of the different apartments (connected to repeater).
It increases 32 monitors/telephones in a maximum distance of 100 meters between the repeater
and the last monitor/telephone and between monitors/telephones of the different apartments
(connected to repeater).
V2Plus
w
llows one of these functions at once
IMPORTANT:
In the output of a
.
distributor cannot be connected another distributor
2
3
