5
INSTALLATION
etail of the repeater installation.
D
The
repeater can be installed on a DIN guide
(6 elements), pressing it lightly.
To extract the repeater from the DIN guide,
use a plain screwdriver to lever the flange as
shown in the picture.
Install the repeater in a dry and protected place without risk of drip or water projections.
To avoid damage, the repeater must be firmly fixed.
DIN 46277
f
3,5 x 50
DIN-7971
f
3,5 x 50
DIN-7971
To install the
repeater directly on the wall, drill two holes
of
6mm. and insert the wallplugs. Fix the
repeater
with the specified screws.
escription of the repeater.
D
The installation or modification the
repeater,
performed
repeater
must be
in the absence of electrical current
.
The installation and handling of the
must be
performed by
authorized personnel.
DESCRIPTION
DIN rail latch release.
Configuration dip switch
Sw1.
Configuration dip switch
Sw2.
Bus
1
connection block
.
Bus
2
connection block
.
Label.
End of line configuration jumper
JP1.
Configuration dip switch
Sw3
.
N
ON
O
ON
ON
ON
ON
