9
Advanced programming of the NHEA Plus SE terminals:
Advanced programming enables the terminal's default settings to be changed:
Turn off the terminal to be programmed (press button
for 3 seconds).
Once switched off, press button
for 3 seconds to enter 'Menu 1' of advanced programming,
the terminal will emit a number of tones and the LED will illuminate yellow.
Men 1:
u
Then adjust the settings as required:
Select the ringtone to be changed: Each press on button
selects a ringtone which is indicated with
blinks (1 to 4 blinks) of the status LED and in the following order: door panel, guard unit, intercom call
and 'HZ' apartment interior door call. When the final selection is reached, the following press returns
the user to the first selection and the status LED blinks once (carousel mode).
-
Changing the ringtone melody:
Then select the melody for the ringtone (selected in the previous step) by pressing button
until the
required 'carousel mode' melody is heard.
The terminal has different ringtones to identify the origin of the call. The melodies assigned by default to the ringtones
can be selected from among others available on the terminal.
Continued overleaf
To activate doctor mode: Press button
, and the status LED will indicate with 2 blinks that the function
is activated or with 1 blink that the function is deactivated.
-
Activating/deactivating the doctor mode function: Doctor mode not activated (default setting).
The 'doctor mode' function enables the lock release to be activated automatically 10 seconds after making a call from
the door panel without having to establish communication or press door release button
. The call ends after 20
seconds and the channel is free.
(Only the master terminal should be configured with 'doctor mode').
NHEA PLUS SE HANDS-FREE AUDIO TERMINAL
PROGRAMMING THE TERMINALS
-
Accessing 'Menu 2' or exiting programming mode:
Men 2:
u
Then adjust the settings as required:
If an apartment has T-540 Plus telephones, Tekna Plus monitors and NHEA Plus SE terminals, the NHEA Plus SE
terminals must be configured in 'Intercom with Plus telephones/monitors' mode, as T-540 Plus telephones and
Tekna Plus monitors do not allow an intercom call to a particular telephone/monitor in the apartment to be made.
That way, when an intercom call is made, all of the terminals, monitors/telephones in the apartment will receive
the call.
-
Intercom with Plus telephones/monitors:
Intercom with Plus SE terminals, telephones/monitors (default setting).
To activate the 'Intercom with Plus telephones/monitors' mode: Press button
, and the status LED
will indicate with 1 blink that the function is in 'Intercom with Plus telephones/monitors' mode or with
2 blinks that the function is in 'Intercom with Plus SE terminals, telephones/monitors' mode.
To access 'Menu 2,' press button
, and the status LED will blink twice.
To exit programming mode, press button
for 3 seconds, and the status LED will turn off (see p. 11).
