11
Continued from previous page
Setting to the 'default value': Press button
, and the terminal will indicate with two audible tones
that all of the options of the terminal's advanced programming (p. 9-10) are set to their default
value.
Men 4:
u
Then adjust the settings as required:
-
Setting all of the terminal's advanced programming options to the
.
'default value'
Reserved.
-
Button has no function.
No function.
-
Button has no function.
-
Accessing 'Menu 1' or exiting programming mode:
When exiting advanced programming mode, the terminal will be turned off: Press button
for 1
second to turn the terminal back on. After any resetting of the terminal and for the following 45
seconds, no operation with it can be performed.
-
Turning on the terminal when exiting programming:
To access
press button
, and the status LED will blink once (see p. 9).
'Menu 1',
To exit programming mode, press button
for 3 seconds, and the status LED will turn off.
NHEA PLUS SE HANDS-FREE AUDIO TERMINAL
PROGRAMMING THE TERMINALS
