manualshive.com logo in svg

golmar Jazz GB2, User Manual

Share
Download
golmar Jazz GB2 User Manual Download Page 9

9

INSTALLATION OF THE DOOR PANEL

Setting ringtone operating mode:

To configure the door panel ringtone when making a call, follow these steps:

See p. 7.

-

In the configuration DIP switch, set DIP 1 and DIP 2 to OFF and DIP 3 to ON.

-

The card reader illumination will blink slowly.

-

Then with the P1 call button, each press selects a different option and in carousel mode:

If pressed once: Configure the door panel with one ringtone.

LED      illuminates and the door panel emits a long tone.

If pressed

: Configure the door panel to hear tones during the call process.

a 2nd time

LED     illuminates and the door panel emits two

tones.

short

If pressed

: Configure the door panel without a ringtone (factory setting).

a 3rd time

LEDs     and     illuminate and the door panel emits three

tones.

short

-

Once the required option is selected, stop pressing P1. Then set DIP 3 to OFF and the door panel will exit

configuration, saving the selected option.

Remember to configure the address of the door panel.

Note:

P1

Setting door panel mode with or without shield installed:

To configure the door panel with or without shield installed, follow these steps:

See p. 7.

-

In the configuration DIP switch, set DIP 1 and DIP 2 to OFF and DIP 3 to ON.

-

The card reader illumination will blink slowly.

-

Then with the P2 call button, each press selects a different option and in carousel mode:

If pressed once: Configure the door panel with shield installed (factory setting).

LED     illuminates and the door panel emits a long tone.

If pressed

: Configure the door panel without shield installed.

a 2nd time

LED      illuminates and the door panel emits two

tones.

short

-

Once the required option is selected, stop pressing P2. Then set DIP 3 to OFF and the

door panel will exit configuration, saving the selected option.

Note:

Remember to configure the address of the door panel.

P2

Setting contact mode for CV- and CV+ (lock release) and C1 and NA1 (auxiliary device):

To change the contact mode for lock release and auxiliary device activation, follow these steps:

See p. 7.

-

In the configuration DIP switch, set DIP 1 to ON, DIP 2 to OFF and DIP 3 to ON.

-

The card reader illumination will blink slowly.

-

Then with the P1 call button, each press selects a different option and in carousel mode:

If pressed once: Configure the door panel with contact mode N.A. (factory setting).

LED      illuminates and the door panel emits a long tone.

If pressed

: Configure the door panel with contact mode N.C.

a 2nd time

LED     illuminates and the door panel emits two

tones.

short

-

Once the desired option is selected, set DIP 3 to OFF and the door panel will exit

configuration, saving the selected option.

Note:

Remember to configure the address of the door panel.

Important:

The type of contact selected will be for both the lock release and the auxiliary device.

P1

JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE

Summary of Contents for Jazz GB2

























Reviews:

No comments

Brands by name

Popular brands

Load more brands